The laser spotlighting cavity use the newest combination cavity structure, and make the laser have high photoelectric conversion efficiency, good quality of light beam, and work stably and reliably. Which make up of optical bench, spotlighting cavity, YAG crystalloid, pump xenon lamp, diaphragm frame and engine cover etc.
the laser can be turned to all direction, and the operate by electricity; mainly used in oversize, large-scale and medium-sized mould’s repair. the machine is controlled by Industrial micro-Computer. Laser welding machine(Manual laser welder ) is use the high energy of heat that instantaneously produced by laser to melt the special-purpose welding wire and connect it with the damaged parts of the mould so it can connect with the original material firmly, after that it shows a refacing by electric spark and grind &cutting and some other processing and so the mould is repaired.
Laser welding principle: Laser spot welding is the use of high-energy laser pulses on the material within the region of small local heating. The energy of laser radiation spreads to the internal material through heat conduction, and the material melted to form a specific pool. Laser (jewelry spot welding) can be welded the same or different materials together. Advantages: made by the introduction of Germany advanced technology to improve, adopted ergonomic design, also can be used for welding of small components, such as: motor electrodes, fiber optic devices and so on. Control system: miniature industrial control PC, stability and anti-jamming capability is more superior to that of the industry products.
•Small heat affected zone in welds created •Fine, smooth and pretty welding spot without post-welding processing •Strong and invisible high-quality repairs can be realized in a very short time •Quick and good quality welding without pollution, efficient and environmental
Laser spot welding is the use of high-energy laser pulses on the material laser Die welder, the laser can be turned to all direction, and the operate by electricity; mainly used in oversize, large-scale and medium-sized mould’s repair. the machine is controlled by Industrial micro-Computer.
Total 5 pcs  FirstPage PreviousPage NextPage LastPage CurrentPage:1/1  10pcs/Page Goto: