hanzlaser.com Official Website > service > technical support > Daily maintenance

Daily maintenance

Updated:2012/7/18 4:04:43  Source:hanzlaser  Edit:hanzlaser  Views:

 1, the replacement of the water and the cleaning of the tank (suggest cleaning the water tank, changing circulating water every week)

Note: Before the machine works, it must ensure that laser tube is full of circulating water.

The water quality and water temperature of circulating water directly affect the service life of laser tube. It is recommended to use pure water, and water temperature should be controlled below 35 ℃. It needs to change the circulating water if more than 35 ℃ , or add the water ice into the water and lower the temperature, (suggest users to select cooling machine, or use two water tank).

Cleaning tank (change water): first of all, turn off the power supply, pull up water inlet pipe, let the water within the laser tube automatically flow into water tank, remove the water pine and signal line. Open the water tank, empty the dirt inside the water cooling machine, replace the circulating water and make a good connection of the water pipes and signal lines, then tide up the joints. Turn on the power, and run 2-3 minutes (make a certain that laser tube is filled with circulating water).

Send to a friend
Serivces
Search Serivces
Online Contuslting
msn:zgzg1125@hotmail.com
skype:lisaseekcn
QQ-contact us
Hanzlaser On
  Hanzlaser on Facebook
http://www.facebook.com/
  hanzlaser on youtube
http://www.youtube.com/user/Hanz..
  Hanzlaser on Twitter
https://twitter.com/hanzlaser1
  hanzlaser on Wikipedia
http://en.wikipedia.org/wiki/Mai..
  hanzlaser in linkedin
www.linkedin.com